Reading your KONOz thermostat

Reading your KONOz thermostat

Your KONOz thermostat shows two numbers on its display. 

• The large number in the top left shows your room temperature.
• The small number on the bottom right shows your set temperature.

There are three settings on this thermostat:

• Heat
• Cool
• Off

To adjust your thermostat, press the large dial on the bottom left of the display. Then, turn the dial until the correct mode is blinking. Note: Avoid clicking into or on the setting icon on the thermostat menu to make adjustments to your thermostat.

The fan status of your KONOz is shown by an icon, located just below the room temperature number. If your fan is running, the fan icon will appear.

If you see “On” under your system mode, the thermostat is actively running.

If there is a battery icon shown on your thermostat, the batteries need to be replaced with four AA batteries.

Also see How to control your thermostat with the Ambient Home app.